Select Page

Eric Bushèe

Eric Bushèe
Eric Bushèe
Data Solution Architect

Eric Bushèe

Data Solution Architect

Mr. Eric Bushèe is a CAD designer and GIS analyst with more than 25 years of experience.  He has extensive experience in spatial analysis, including the planning and implementation of spatial interpolations in both 2D and 3D environments. He regularly uses both ArcGIS and C Tech’s Earth Volumetric Studio software to construct interpolation grids for soil, sediment, and groundwater modeling. He routinely develops complex spatial grids to estimate volumes, assess predictability errors, and guide future sampling efforts.

In CAD design, Mr. Bushèe’s experience includes producing complete sets of CAD construction drawings for multiple environmental, transportation, and civil engi...

Mr. Eric Bushèe is a CAD designer and GIS analyst with more than 25 years of experience.  He has extensive experience in spatial analysis, including the planning and implementation of spatial interpolations in both 2D and 3D environments. He regularly uses both ArcGIS and C Tech’s Earth Volumetric Studio software to construct interpolation grids for soil, sediment, and groundwater modeling. He routinely develops complex spatial grids to estimate volumes, assess predictability errors, and guide future sampling efforts.

In CAD design, Mr. Bushèe’s experience includes producing complete sets of CAD construction drawings for multiple environmental, transportation, and civil engineering projects. He uses AutoCAD Civil 3D to construct surfaces, profiles, and sections while preparing volume estimates for soil and sediment remediation projects.

Mr. Bushèe has produced technical maps and graphics in GIS and other software for a variety of environmental and technical documents. He specializes in creating complex maps—often drawing from multiple, varied data sources—that are both aesthetically pleasing and technically accurate. He has created maps for RI/FS projects, engineering evaluation and cost analysis (EE/CA) studies, sampling and analysis plans, environmental impact statements, environmental assessments, Clean Water Act Section 404 jurisdictional delineations, site-specific permits, cultural and biological resources evaluations, community wildfire protection plans, and open-space master plans.

Mr. Bushèe also has extensive experience using ArcGIS web mapping tools to display GIS layers in browser-based maps. Using ArcGIS Online tools, he has produced web maps, web applications (Experience Builder), and story maps to display geospatial data for a variety of audiences.

Read More    Read Less   

GIS Analysis

Former Wood Treating Facility, Superfund Site, Navassa, North Carolina As GIS analyst, supported the CERCLA process to characterize and remediate environmental impacts associated with a wood treatment facility. Provided GIS support, including spatial analysis and map production for remedial investigation reports, feasibility studies, remedial action work plans, and waste management plans.
Berry’s Creek Superfund Site, New Jersey Acted as GIS analyst and cartographer for a remedial investigation report for the Berry’s Creek Study Area Superfund site. Provided GIS support, including map production, spatial analysis, and database management. Prepared sitewide digital elevation model, which was developed from a variety of sources, including bathymetric surveys, light detection and ranging (LiDAR) surveys, CAD topography, and small-scale ground surveys.
Kerr-McGee Chemical Corp. Superfund Site, Columbus, Mississippi Supported the CERCLA process to characterize and remediate environmental impacts associated with a former wood treatment facility. Provided GIS support, including map production, spatial analysis, and database management for remedial investigations, risk assessments, and feasibility studies.
Steel Mill, Portland, Oregon As GIS analyst, supported a multiyear source control and remedial investigation at an active steel mill. Provided GIS support, including map production, spatial analysis, and database support for site characterization, risk management, and the implementation of remedial actions to prevent soil, sediment, and stormwater impacted with PCBs and metals from adversely affecting the Portland Harbor Superfund site.
Hazardous Materials in Soil, Various Public Schools Statewide, Hawai‘i Assisted the State of Hawai‘i Department of Education with building-exterior and open-space soil studies at various school campuses. Provided GIS support, including map production, spatial analysis, and database management for soil management plans and interim environmental hazard management plans.
Wood Rosin and Turpentine Manufacturing Site, Georgia Acted as GIS analyst for a revised conceptual site model to support an alternate integrated remedial approach. Provided 3D modeling support to visualize volatile organic compound plumes in multiple groundwater zones.
Portland Harbor CERCLA RI/FS, Portland, Oregon Served as GIS analyst for a sediment remedial investigation report with more than 600 maps. Provided GIS support, including map production, spatial analysis, and database management.
Former DDT Manufacturing Facility, Portland, Oregon Supported the in-water EE/CA for a sediment removal action at a former chlor-alkali manufacturing facility within the Portland Harbor Superfund site on the Willamette River. GIS work included mapping chemical concentrations of multiple analytes in surface and subsurface sediment. Used 3D modeling to estimate the amount of buried sediment exceeding remedial action levels.
Deepwater Horizon, Gulf of Mexico Worked in conjunction with the consulting team in responding to the Deepwater Horizon accident and oil spill in the Gulf of Mexico. Provided mapping for a series of data reports. Also participated in quality assurance procedures for spatial data. Laboratory work included the processing of sediment samples for analysis.
Reservoir Sediment Investigation, Pueblo of Santa Ana, New Mexico Acted as GIS analyst for sediment investigation throughout a dry reservoir bed in the Rio Jemez. Concentrations of eight separate metals were analyzed and mapped via ArcGIS.
Former Mining Site, Rosiclare, Illinois Supported a field sampling plan for risk assessment and remedial planning. GIS tasks included locating and mapping city parcels and lots using coordinate geometry descriptions from older plat maps and parcel descriptions.
San Jacinto River Waste Pits RI/FS, Harris County, Texas Produced technical maps and figures in support of multiple sampling and analysis plans, including those for soil, sediment, and tissue sampling. Concentrations of chemical contaminants were analyzed and mapped in GIS.
New York State Brownfield Cleanup Program, 34th Street and 42nd Street, West Side, Manhattan, New York Served as GIS analyst for multiple investigations to address New York State spills and brownfield cleanup programs. Created figures and maps to support Phase I and II investigations, remedial action work plans, interim remedial work measure work plans, and RI/FS initiatives.

CAD Design

Port of Kalama Dredging Program, Kalama, Washington Acted as project manager and CAD designer for dredging construction design drawings. Prepared complete sets of drawings for annual dredging plans, which included preparing estimated dredge volumes and areas based on bathymetric surveys.
Former Smelter Site, Blackwell, Oklahoma Acted as CAD designer for construction design drawings for the expansion of a groundwater extraction system at a historical smelter site. The construction drawings included the design of horizontal extraction wells and corresponding conveyance pipes to contain the spread of zinc and cadmium contamination.
Electric Power Generating Station, Hawai'i Acted as CAD designer for construction design drawings for a sediment and tunnel solids source control action. Prepared complete sets of drawings, including those for capping and excavation design and best management practice implementation.
Mission Bay Ferry Landing Project, San Francisco, California Acted as CAD designer for a construction drawing set for an engineered cap to address contaminated sediments at a ferry terminal. Drawings included capping plans, cross sections, and details.
Interim Remedial Measure, Manufacturing Site, New Jersey Acted as CAD designer for a construction drawing set for excavations and the capping of a site. Drawings included capping plans, cross sections, and supporting drawings for an erosion and sediment control plan.
Perfluoroalkyl Substance Water Treatment, New Jersey Acted as CAD designer for a construction drawing set for the expansion of a 1.2 million gallon per day potable water treatment plant to add treatment for the removal of perfluoroalkyl substances. Drawings included piping and instrumentation diagrams as well as site treatment piping plans and cross sections.
Steel Mill, Portland, Oregon Acted as CAD designer for riverbank stabilization construction design drawings. Prepared complete sets of drawings for a riverbank design and an erosion and sediment control plan. Riverbank existing and final grades were modeled in Civil 3D to provide soil volume estimations.
Former DDT Manufacturing Facility, Portland, Oregon Acted as CAD designer for stormwater construction design documents. Prepared complete sets of construction drawings for stormwater source control measures and an erosion sediment control plan. Modeled stormwater site features, including detention basins, channels, berms, and fill areas in Civil 3D to prepare a final composite topographic surface across the site.
North Boeing Field/Georgetown Steam Plant Interim Action, Seattle, Washington Acted as CAD designer for a complete set of construction drawings for interim action soil removal activities. Soil removal (dredged) areas were modeled in Civil 3D according to specific analyte cleanup levels. Removal areas were incorporated into existing topography to create a composite excavated surface for accurate cut/fill volume estimates.
Berry’s Creek Superfund Site, New Jersey Incorporated LiDAR elevation data into existing topographic surveys to create a composited surface to support future hydrodynamic modeling efforts. Used Civil 3D to merge LiDAR data with surveyed stream and channel outlines to better characterize the topographic surface across the site. Final site surfaces were output to GIS to produce a final site digital elevation model.
Laurel Hill Site Remedial Design, Queens, New York Served as CAD designer for a site-specific cap at a former refinery site. Grading plans were included in the construction drawings, and a final grading surface was created in Civil 3D to provide accurate cut/fill estimates.
RETURN TO OUR TEAM PAGE